Tunnel Controllers

To check if Stack Controller is running, look for the Stack Controller icon on the taskbar and left-click it. When the Connection light is flashing, Stack Controller is connected. If you do not see the Stack Controller Icon on the task bar, then locate the Stack Controller shortcut on the des...

This guide applies to sites with the ICS web based tunnel controller, Tunnel Master wbc (WBC), who need to input or modify Retract settings from a Web Browser. Supplemental Documentation Tunnel Master wbc User Manual Overview Precautions Backup WBC Settings Glossary of Terms Retract Programming ...

IMPORTANT: Before changing any Tunnel Master wbc (WBC) settings, ICS recommends to backup your current settings. Create a Backup of your WBC settings To backup WBC settings, follow these steps: Open a web browser and navigate to the WBC IP address.The Default value is 10.0.0.200 but this may var...

This guide applies to sites with the ICS web based tunnel controller, Tunnel Master wbc (WBC), who need to input or modify Service Settings from a Web Browser. Supplemental Documentation Tunnel Master wbc User Manual Overview Backup WBC Settings Create Backup of WBC Settings Restore Backup of ...

This guide applies to sites with the ICS web based tunnel controller, Tunnel Master wbc (WBC), who need to input or modify Controller settings from a Web Browser. Supplemental Documentation Tunnel Master wbc User Manual Overview Backup WBC Settings Create Backup of WBC Settings Restore Backup ...

This guide applies to sites with the ICS web based tunnel controller, Tunnel Master wbc (WBC), who need to input or modify Tunnel Settings from a Web Browser. Supplemental Documentation Tunnel Master wbc User Manual Overview Backup WBC Settings Tunnel Settings Considerations   Backup WBC Sett...

This guide applies to sites with ICS tunnel controllers, Tunnel Master wbc, who need to input or modify Relay Settings from a Web Browser. Supplemental Documentation Tunnel Master wbc User Manual Overview Backup WBC Settings Create Backup of WBC Settings Restore Backup of WBC Settings Relay ...

A Pulse signal is a vital component of washing a car with an ICS controller. If a Controller is unable to get a signal from the Pulse sensor, it will not know how fast the conveyor is moving a vehicle along the tunnel, and nothing will activate in the tunnel.If you are experiencing an issue where...

A Gate signal is a vital component of washing a car with an ICS controller. If a tunnel controller is unable to get a signal from the Gate sensor (typically a Photo eye), it will not know the vehicle length for the wash and will not activate anything else in the tunnel.If you are experiencing an ...

A ghost wash is a term for a test wash that does not actually use a vehicle, but instead fools the sensors in order to check for proper timing and operation of equipment in the tunnel. Example: Site would like to perform test wash after changing settings in the tunnel controller. The first thing ...

Who needs to reference this guide? Sites who need to input or modify settings on the wash menu of the Tunnel Master Jr. (TMJ) Tunnel Controller. This guide is typically performed AFTER programming Outputs, Services, and Output Lists. Overview Wash Settings Wash Settings Example Critical Wash Set...

Who needs to reference this guide? Sites with ICS TMJ Tunnel Controllers who need to input or modify settings on the Controller. Overview Output Settings Menu Output Menu Items Output Menu Settings Example Output Settings Menu  The Outputs menu option is where the user will initially setup and ...

Who needs to reference this guide?Sites who need to input or modify Service and Output List settings on the ICS tunnel controller, Tunnel Master Jr. (TMJ). Overview:  Service and Output List Options Set Service Number and Output List Example For more detailed information, please refer to the Se...

Who needs to reference this guide? Sites with a Tunnel Master JR. (TMJ) tunnel controller who need to input or modify settings in the wash tunnel. Overview Navigating the Menus and Settings Wash Menu Settings Output Settings Service and Output List Settings Critical Settings to Know Navigating ...

This procedure is for sites with ICS Tunnel Controllers, Tunnel Master WBC and / or Tunnel Master Jr., that need to be timed in the tunnel. The reasons for changing the Pulse Length could be due to changes in conveyor chain or a replaced Pulse device. Terminology: Pulses are the flashes of the LE...

Stack and Control is a vital component after a vehicle has purchased a wash from an ICS point of sale or payment terminal. If an ICS tunnel controller is unable to get a signal from Stack and Control, it cannot determine which wash service to give to each vehicle in the tunnel, resulting in a sev...